CuSn Wire

WeChat

Sina Weibo

QQ space

Douban

Baidu Post Bar

Type High-performance Alloy Rods and Wires

Brand TIMES

+86 400 021 0112

Detail

CuSn Wire

Copper-tin alloy has excellent tensile strength and good bending properties. Since tin is a low melting point metal, it is difficult to add and cast. Our company adopts special melting and casting technology. The copper liquid is filtered to prevent the intrusion of impurity elements and ensure the purity, stability and consistency of the chemical composition of the product. And the follow-up process adopts a reasonable heat treatment process, and the wire has good drawability (minimum continuous drawing of 0.020mm), which greatly reduces the breakage rate of the ultra-fine wire drawn. The surface of copper-tin alloy wire can be plated with silver, tin and other coatings for protection or solderability.

Variety：Alloy No.

Tin content：Percentage of Sn

state：Temper Hard H

wire diameter：Diameter

tensile strength：Tensile Strength

Elongation：Elongation

Conductivity：Electrical Conductivity

CuAl Wire

In addition to high strength and high electrical conductivity, it also has excellent creep resistance, fatigue resistance, heat resistance, wear resistance and electrical contact.

Our company adopts the melting and casting technology with independent intellectual property rights, and through the development and breakthrough of the high-temperature melting impurity removal technology and the alloy melt stirring technology, the purity, stability and consistency of the chemical composition of the product are guaranteed. And by adopting and improving casting technology, continuous radial high compression ratio wire drawing technology and special heat treatment technology, the manufactured products have excellent comprehensive performance and drawability, and the products meet the requirements of ASTMB624-2007 (2017) standard.

CuMg Wire

High-strength copper-magnesium alloy wire is a copper alloy that fully meets environmental protection requirements to replace copper spacer alloy. Its performance index is similar to that of copper-cadmium alloy, and it has excellent electrical conductivity and high tensile strength. In addition to being used in load-bearing cables and contact wires for electrified railways, it is also widely used in special wires such as speaker leads, automobile wires, airborne antennas, and high-temperature cables.

High-strength copper-magnesium alloy wire has excellent electroplating and drawability, and can be silver-plated, nickel-plated and drawn into ultra-fine wires.

CuNi Wire

As an electrothermal alloy, copper-nickel alloy has the following properties: good oxidation resistance at high temperature; long-term stability to oxidation under working conditions, high resistivity and low temperature coefficient of resistance, good process performance, With sufficient high-temperature strength, it is suitable for making low-resistance elements, electric heating elements, and is also widely used in heating wires and heat-resistant wires.